The waste toner box cannot be reliably modified or emptied to clear the error.Ī. Brother cannot ensure the reliability of 3 rd party consumables or consumables that have been modified. Has the Waste Toner Box been replaced with a genuine Brother Waste Toner Box?

If the message is still present, go to Step 13.ġ3. The issue is resolved if the message 'Waste Toner Full' no longer appears on the display. Plug in the brother machine and turn on the power. Place the grey lock lever (1) is in the up position and put the drum unit in the machine. Push down on the green area of the belt unit to lock it in place.ġ0. Match the arrow marks on the belt unit with the arrow marks on the machine. You should also check the Waste Toner Box area for scrap paper, etc. NOTE: Be sure to remove any packing materials that might be present on the Waste Toner Box, especially the bottom surface. Unpack the new Waste Toner Box and put the new one in the machine using the green handle. If you have questions, call your local waste disposal office.Ĩ. NOTE : Discard the used waste toner box according to local regulations, keeping it separate from domestic waste. Remove the Waste Toner Box from the machine using the green handle. NOTE : We recommend that you place the belt unit on a clean, flat surface with a piece of disposable paper underneath it in case you accidentally spill or scatter toner.ħ. Hold the green parts of the belt unit with both hands and lift the belt unit up, and then pull it out. NOTE : We recommend that you place the drum unit on a clean, flat surface with a piece of disposable paper underneath it in case you accidentally spill or scatter toner.Ħ. Hold the handles of the drum unit when you carry it. Lift the front of the drum unit and pull the drum unit completely out of the machine using the green handles on the drum unit.ĥ. Release the gray lock lever (1) that is on the left side of the machine. Lift the drum unit up and then pull it out until it stops.Ĥ. Press the front cover release button and then open the front cover.ģ. The power switch is located on the lower right side of the machine.Ģ. Turn off the power and unplug the Brother machine.If the message 'Waste Toner Full' appears on the display, follow the steps below. The message is automatically cleared when the box is replaced. Visit to purchase supplies and accessories.

The part number for the Waste Toner Box is WT100CL. The Waste Toner Box is located under the Drum and Belt unit of your Brother machine. It has a life expectancy of approximately 20,000 depending on average page coverage, etc. The Waste Toner Box collects waste toner that results from the printing process.

Replace wt box brother mfc 9330cdw